Follow The Various Commercial Glazing Idaho Criteria For Your Glass Installations

By Deanne Shepard


Commercial glazing requirements are in place by specific Idaho laws. This is all necessary for safe usage of glass materials, as deemed by the commercial glazing Idaho criteria. In these specifications, Dalle glass material is supposed to be composite material made with several pieces of glass within a cast matrix. This makes Dalle glass a decorative material, and not functional like many other glass materials are.

Every glass pane must include the manufacturer's make, also indicating the glazing material type and thickness. These labels have to be placed with the proper technique so it cannot be removed without otherwise destroying the pane. Manufacturers can use ceramic firing or sand blasting to do so. The contractors must not take these labels off unless an affidavit gives approval to do so.

Any glass that is at a slope of 15 degrees or lower have to be conditioned for hard winds. This means that it has to have enough protection of wind load resistance. You can do this by adding laminated glazing material on all the glass at these slopes. You can use material like polyvinyl butyral, or something similar in quality. This laminate, whatever material it is, has to be at least 0.76 mm in thickness. Additionally, the glass in all storefronts or partitions have to meet Idaho's specific seismic requirements for the possibility of damage during earthquakes.

The commercial requirements also state that railing in-fill panels have to also meet the appropriate safety criteria. This calls for suitable material of at least a quarter inch thick. Additionally, glass in all elevators have to be laminated as well, and markings have to stay visible even after everything is installed.

Certain tools that won't be found in other professions will be needed for commercial glazing. Having these helps quicken the job, allow for a professional finish, and help make a clean installation. You might be able to find some of these tools in general hardware stores, but it's most likely that you will have to visit a store that sells specialty supplies. This equipment helps in both safety and productivity as well.

Handling glass always requires safety equipment. You will need to protect your eyes with safety goggles or glasses, and also wear glass handling gloves to keep your hands safe. Additionally, you might want protective sleeves for your arms.

In the commercial setting, there are some very basic yet essential tools you must use. These are oil-filled glass cutters, suction cups, vinyl rollers, and measuring tape. The suction cups can position the glass at the opening, and rollers get install and hold gaskets in place around the glass. Measuring tapes, the best being around 1 inch wide, will help take exact measurements as well.

Vinyl rollers can be cut with razor knives or cutters. Vinyl usually stretches, so it will need to be trimmed and reinstalled after removal. Plastic or rubber mallets can help install the aluminum trims at the openings. A bastard cut file of about half an inch can fit the trims that have shifted. You'll also need a caulking gun to keep pressure on sealants.




About the Author: